Filtakleen USA Manufacturing—220 W. Cottage Ave., Sandy, UT 84070
Toll Free 1-877-464-5728 Fax 801-233-2876 Email sales@filtakleen-usa.com
Once installed, Filtakleen's filtering efficiency removes all damaging wear particles normally missed by the main filter, this removal of the ultra fine debris at source immediately reduces the risk of malfunctioning control valves as well as dramatically reducing the erosion of the hoses and seals caused by these fine particles. This stops the sand blasting effect.
In addition Filtakleen takes away the risk of silting of the suction filters which can cause pump damage through cavitation. In fact, the finer tolerances of today's machinery makes the removal of 1-25 micron wear particles a necessity and so by addressing this need with Filtakleen, you are creating Major Long Term Benefits in both component life and circuit operation.
100% WATER REMOVAL -STOP ACIDITY
By its ability to remove all water content Filtakleen reduces dramatically the normal acid buildup in the oil so avoiding the corrosion and chemical degradation of all the seals and hoses as well as preventing unnecessary pump wear and cavitation through invert emulsions. SPECIAL NOTE Filtakleen is a supplement to the main filters and by continually taking only a small amount of oil from the system we are able to perform a thorough cleaning operation on the oil.
Design Features—
Special casing for easy replacement.
Powder coated 1-piece aluminum body for total durability.
Machined sealing edges for 100% filtering efficiency.
Universal mounting bracket.
