This system is designed for continuous, unattended operation.

This is a complete system with heating, cooling and automatic shut-off when filter capacity is reached.

The Auxiliary inlet allows for easy and rapid addition of make-up oil.

How Does It Work?

The Filtakleen filter is installed in the circuit after the pump. It is connected into the system by hoses and mounted remotely at a convenient location.

The filter works by taking a percentage of the oil and slowly percolating it through a dense filter medium.

The flow rate of 4-6l/min will not affect system performance as it is taking only a percentage (typically 10-12%) of the total flow. This low flow rate means that filtration to a much finer tolerance than that achieved from in-line filters is possible.

Maintenance

Changing the element is a quick and easy job. Incorporating a ball valve into the inlet side of the circuit means the filter can be isolated. The retaining bolt is unscrewed, the lid taken off, the old filter removed and replaced with the new one… A simple, no-mess job that takes only a couple of minutes.

Recommended filter change frequency is every 500 hours or quarterly, whichever comes first. For filters installed on a system with used oil, initial changes should be more frequent.

For additional information or questions, please contact FiltakleenUSA here